Latest Products

Page 1 of 1:    18 Items

 Compare Selected
NEW
RAVENOL Turbine Oil T100

RAVENOL Turbine Oil T100

RAVENOL Turbine Oil T 100 is produced for the lubrication of fixed gas and steam turbines, as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.

It can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings. It is especially recommended for parts where water contamination can cause problems, because of its high protection against rust and oxidation. It is also suitable for use in electrical machines or machines driven by steam turbines, such as generators, compressors, pumps and transmissions.  

BS 489, DIN 51515 (L-TD), ISO 6743/0

 
NEW
RAVENOL Turbine Oil T32

RAVENOL Turbine Oil T32

RAVENOL Turbine Oil T 32 is produced for the lubrication of fixed gas and steam turbines, as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.

It can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings. It is especially recommended for parts where water contamination can cause problems, because of its high protection against rust and oxidation. It is also suitable for use in electrical machines or machines driven by steam turbines, such as generators, compressors, pumps and transmissions.  

BS 489: 1999, DIN 51515 (L-TD)

  • Siemens TLV 9013 04
  • General Electric GEK 46506D
  • Alsthom HTGD 90117
 
NEW
RAVENOL Turbine Oil T46

RAVENOL Turbine Oil T46

RAVENOL Turbine Oil T 46 is produced for the lubrication of fixed gas and steam turbines, as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.

It can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings. It is especially recommended for parts where water contamination can cause problems, because of its high protection against rust and oxidation. It is also suitable for use in electrical machines or machines driven by steam turbines, such as generators, compressors, pumps and transmissions.  

BS 489, DIN 51515 (L-TD), ISO 6743/0

 
NEW
RAVENOL Turbine Oil T68

RAVENOL Turbine Oil T68

RAVENOL Turbine Oil T 68 is produced for the lubrication of fixed gas and steam turbines, as well as turbo compressors with and without transmission according to the specifications of DIN 51 515-2.

It can also be used for the lubrication of hydraulic systems, compressors, gear transfers and bearings. It is especially recommended for parts where water contamination can cause problems, because of its high protection against rust and oxidation. It is also suitable for use in electrical machines or machines driven by steam turbines, such as generators, compressors, pumps and transmissions.  

BS 489, DIN 51515 (L-TD), ISO 6743/0

 
NEW
RAVENOL ATF Fluid

RAVENOL ATF Fluid

RAVENOL ATF Fluid is an Automatic Transmission Fluid (ATF) designed for hydrostatic and hydrodynamic systems requiring an ATF Type A Suffix A. It is a very high quality mineral gear fluid for automatic fluid couplings and torque converters as well as power steering aids. It is also suitable for turbo couplings, servo clutches and other hydrostatic/ hydrodynamic systems when used according to the unit manufacturer's guidelines.

  • Type A Suffix A (TASA)
  • ALLISON C-4
  • MAN 339 Typ A
  • MB 236.2
  • Renk Doromat
  • Cat. TO-2
 
NEW
RAVENOL Turbo Oil T32

RAVENOL Turbo Oil T32

RAVENOL Turbo Oil T32 is a high quality lubricating oil for gas and steam turbines as well as for turbo compressors with and without gears, which meets the requirements of DIN 51515-2.

It was designed for use in stationary gas turbines, steam turbines and also in electrical machines driven by steam machines, such as generators, compressors, pumps and gearboxes. It is also suitable for use in lubrication of hydraulic systems, compressors, gear transmissions and bearings.

DIN 51515 Teil 1 (L-TD), Teil 2 (L-TG)

  • Siemens TLV 901304
  • Siemens TLV 901305
  • MIL-L-17672 D
  • British Standard BS 489
  • General Electric GEK 32568 A/C
  • CEGB Standard 207001
  • Brown Boveri HTGD 90117
  • U.S. Steel 120
  • Westinghouse Electric Corp. Turbine Oil Spec.
  • Alstom HTGD 90117 V0001 S
  • Solar ES 9 224 requirements for gas turbine oils Class II (ISO VG 32)
 
NEW
RAVENOL Turbo Oil T46

RAVENOL Turbo Oil T46

RAVENOL Turbo Oil T46 is a high quality lubricating oil for gas and steam turbines as well as for turbo compressors with and without gears, which meets the requirements of DIN 51515-2.

It was designed for use in stationary gas turbines, steam turbines and also in electrical machines driven by steam machines, such as generators, compressors, pumps and gearboxes. It is also suitable for use in lubrication of hydraulic systems, compressors, gear transmissions and bearings.

DIN 51515 Teil 1 (L-TD), Teil 2 (L-TG)

  • Siemens TLV 901304
  • Siemens TLV 9013 05
  • MIL-L-17672 D
  • British Standard BS 489
  • General Electric GEK 32568 A/C
  • CEGB Standard 207001
  • Brown Boveri HTGD 90117
  • U.S. Steel 120
  • Westinghouse Electric Corp. Turbine Oil Spec.
  • Alstom HTGD 90117 V0001 S
  • Solar ES 9 224 requirements for gas turbine oils Class II (ISO VG 46)
 
NEW
RAVENOL Calibration Fluid 2.5

RAVENOL Calibration Fluid 2.5

RAVENOL Calibration Fluid 2.5 is a low viscosity test fluid for the calibration of diesel injection pumps with a very close viscosity tolerance. It is noted for its excellent wear, corrosion-protection and low foaming tendency. 

  • Bosch Norm VS 15665-OL – CV
  • ISO-Norm 4113-CV-AW
  • MAN
  • Anti-corrosion oil for internal preservation of MTU fuel systems
  • Volkswagen
  • Lucas CAV, MB DBL 6513
 
NEW
RAVENOL Gear Oil CLP 460

RAVENOL Gear Oil CLP 460

RAVENOL Gear Oil CLP 460 is a high quality, mineral-based gear oil formulated with lead-free high-pressure additives (EP additives). Its special active substance combination provides a good, stable high-pressure impact load capacity. It has a low pour point and therefore a good cold behaviour. It can be used as a lubricant in nearly all industrial gear drives due to its good stress and impact characteristics.

DIN 51 517 Part 3, FZG 12, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes

 
NEW
RAVENOL Gear Oil CLP 680

RAVENOL Gear Oil CLP 680

RAVENOL Gear Oil CLP 680 is a high quality transmission fluid based on mineral oil, formulated with unleaded high pressure additives (EP additives). A very good, stable high pressure absorption capacity for impact loads is achieved due to its special combination of ingredients. It has a low pour point and therefore, a good low-temperature performance. It can be used as a lubricant in virtually all industrial transmission systems, even for the most severe stress and impact loads due to its excellent properties.

DIN 51 517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes

 
NEW
RAVENOL Glycosynth Gear 150

RAVENOL Glycosynth Gear 150

RAVENOL Glycosynth Gear 150 is a synthetic industrial gear oil based on poly-alkylene-glycol with the addition of special additives. It is suitable for the lubrication of heavy loaded mechanical gearboxes and bearings with a high thermal load. In comparison with mineral industrial gear oils, a substantial extension of the oil drain interval is possible. 

DIN 51 517 Part 3, FZG>12

 
NEW
RAVENOL Glycosynth Gear 220

RAVENOL Glycosynth Gear 220

RAVENOL Glycosynth Gear 220 is a synthetic industrial gear oil based on poly-alkylene-glycol under addition of special additives. It is suitable for the lubrication of heavy loaded mechanical gearboxes and bearings with a high thermal load. In comparison with mineral industrial gear oils, a substantial extension of the oil drain interval is possible. 

DIN 51 517 Part 3, Teil 3 CLP, FZG>12

 
NEW
RAVENOL Glycosynth Gear 320

RAVENOL Glycosynth Gear 320

RAVENOL Glycosynth Gear 320 is a synthetic industrial gear oil based on poly-alkylene-glycol under addition of special additives. It is suitable for the lubrication of heavy loaded mechanical gearboxes and bearings with a high thermal load. In comparison with mineral industrial gear oils, a substantial extension of the oil drain interval is possible. 

DIN 51 517 Part 3, Teil 3 CLP, FZG>12

 
NEW
RAVENOL Heat Transfer Oil 32

RAVENOL Heat Transfer Oil 32

RAVENOL Heat Transfer Oil 32 is heat-transfer oil based on selected, refined base oils with good thermal stability, a good resistance to oxidisation that causes low precipitation in the installation and has inhibitors against corrosion. It is suitable for use as heat-transfer medium in closed circulating type heat-transfer systems, which work with indirect heating and high temperatures (above 100 °C). 

 
NEW
RAVENOL Heat Transfer Oil 68

RAVENOL Heat Transfer Oil 68

RAVENOL Heat Transfer Oil 68 is mineral oil based heat-transfer oil which is suitable for industrial operation of closed heat transfer systems. It offers high thermal conductivity, combined with high thermal stability and high resistance to oxidation. It is particularly suitable for use in closed heating systems where the maximum flow temperature does not exceed 320°C. 

 
NEW
RAVENOL Gear Oil CLP 100

RAVENOL Gear Oil CLP 100

RAVENOL Gear Oil CLP 100 is a high quality, mineral-based gear oil formulated with lead-free high-pressure additives (EP additives). Its special active substance combination provides a good, stable high-pressure impact load capacity. It has a low pour point and therefore a very good cold behaviour. It can be used as a lubricant in nearly all industrial gear drives due to its good stress and impact characteristics.

DIN 51 517 Part 3, FZG 12, US Steel 224

 
NEW
RAVENOL Gear Oil CLP 150

RAVENOL Gear Oil CLP 150

RAVENOL Gear Oil CLP 150 is a high quality, mineral-based gear oil formulated with lead-free high-pressure additives (EP additives). Its special active substance combination provides a good, stable high-pressure impact load capacity. It has has a low pour point and therefore a very good cold behaviour. It can be used as a lubricant in nearly all industrial gear drives due to its good stress and/or impact characteristics.

DIN 51 517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes

 
NEW
RAVENOL Gear Oil CLP 220

RAVENOL Gear Oil CLP 220

RAVENOL Gear Oil CLP 220 is a high quality, mineral-based gear oil formulated with lead-free high-pressure additives (EP additives). Its special active substance combination provides a good, stable high-pressure impact load capacity. It has a low pour point and therefore a very good cold behaviour. Is can be used as a lubricant in nearly all industrial gear drives due to its good stress and impact characteristics.

DIN 51 517 Part 3, US Steel 224, AGMA 9005-D94, Cincinnati Milacron, Clean Panel Coker, S-200 Oxidation Tubes

 
 Compare Selected

Page 1 of 1:    18 Items